Luminaire with bracket YORK 4600

Flat rectangular luminaire design. Luminaire housing made of aluminum sand cast, wall thickness 4 mm, with fixed bracket for pole mounting. Spigot ø 76,1 mm (via adaptor reduction on spigot ø 60 mm possible). Overhanging total 595 mm. Luminaire cover made of printed single-pane safety glass, 4 mm. Screws and connecting parts made of stainless steel. Dimensions 640 x 260 x 60 mm. Weight: 7 kg. Luminaire pre-wired up to the connection area. Wiring up to junction box by the customer.

Luminaire doesn‘t have to be opened during installation, because the space for the cable connection is in the bracket easy accessible. This prevents damage to the electronics from electrostatic discharges. All electrical components and lines are combined in one electrical unit. Electrical unit with safety plug can be plugged in directly.

Maintenance by simply replacing the complete electrical unit. For the maintenance of the LED module, the complete LED electrical system can be unscrewed and removed using 5 screws. The electrical connection can be separated via a plug connection. All screws are remain captive, even when replacing the power supply unit. Interchangeable luminaire glass.

Ingress protection IP66. IK-Code IK07. Wind catching surface 0,05 m². ULOR <0,5%. 
 Colour: Coating DB 703 or all RAL (classic-unicolour), Hess-DB and Glimmer Hess colours. RAL Pearl-Metallic on request. Corrosiveness category C3 long (high) - DIN EN ISO 12944-5.

Equipment: LED-module and EB, dimmable. Exchangeable, rectangular aluminium core printed circuit boards for optimal thermal management with high-power LEDs mounted in grid-like manner and fastened via 2 screws and holders per board. Luminaire intended for operation with constant AC 220-240V according to DIN IEC 38, 50/60 Hz. Surge protection 10kV (1 pulse), 8kV in protection rating I and II. Optics made from PMMA ensure a homogeneous light distribution. Lighting according to DIN EN 13201 is possible dependent on light planning and existing pole spacings. Integrated, electronically controlled temperature monitoring
LED-lifetime:
L80 B10 / 100.000h - TA -40°C - <= 25°C
L70 B10 / 50.000h - TA >25 - <=50°C
Dimming optionally as follows:
- Without dimming and without CLM (constant lumen management)
- Or with dimming via DALI, StepDim or AstroDim
- And / or with CLM (to be specified in the order)

Optic O4, asymmetrical wide, optimised for foot and cycle path illumination. Rated input power approx. 28 W without CLM – with CLM start 20 W, end 28 W. 3000 K. CRI min. 80. Protection rating I. Technical changes reserved.