POSITANO RGB LED Illuminating Seat 12.16400.0 The bench's rectangular parallelepiped housing shall be constructed from single-pane tempered safety glass. The luminaire housing shall be fabricated from 3-mm thick V4A stainless steel. The assembled illuminating seat housing shall be 710 x 410 mm with 120-mm in-ground installation depth and 405-mm above-grade height. The area of the sitting surface shall be 705 x 405 mm. The single-pane safety glass sides are to be 15 mm and the seat 19 mm thick. The outer glass surface shall have anti-slip squares in a quadratic arranged pattern. Together with the frosted inner glass surface, which shall also have a pattern of squares that are identical to those on the outer surface, it is to create an intriguing 3D effect. The emitted light shall be diffused and homogeneous. Beam angle shall be 180°. The luminaire housing shall install flush with grade, so that only the glass housing is visible. Total weight is to be 89 kg with the installation frame. Maximum static load capacity is 500 kg. Maintenance-free due to LED technology. The product shall come with grips to permit its safe carrying. A separate housing shall be included to contain the electronic control gear, which is installed by others in the luminaire housing.    Ingress protection IP 54 ENEC 10 / VDE-CE   Subject to technical changes RGB LED configured LEDs shall have a rated input of 45 W. The electronic control gear shall be 230V AC / 24V DC with power factor correction (PFC) to attenuate the total harmonic distortion and reactive power. The luminaire is to be provided with a H07BQ-F 3G1.5², 2-metre long electrical cable.   The electrical unit shall house an RGB control. The RGB Master module shall serve as its controller. If several luminaires are connected together, the Master module can serve as output module for programme changes, which it transmits to all of the luminaires in the network.   The following preset effects run in continuous cycles:  - Effect 1: Standard alternating colours in 2.5-second sequences. - Effect 2: Slower, less abrupt colour changing in 10-second sequences. - Effect 3, "Blob": Random, full fade-in colours - Effect 4: User-defined colour changing (support / programming by Hess) - Effect 5, "LSD": Randomly alternating colours - Effect 6, "Fire": Fire simulation - Effect 7, "Flash": Simulates a thunder storm with random lightening - Effect 8, "Burst": Random flashes of colour A remote RGB control is available via extra order to switch the programmes and dim the LEDs. (Must be ordered separately with the Article No. 11.80800.1V002).  A USB dongle is offered. It permits the wireless control and programming via the RGB controller in the electrical unit. (Must be ordered separately with the Article No. 11.80800.1V003).   The luminaire shall be configured for operation on 230 V constant AC power supply as per DIN IEC 38.   Safety class I