Pole mounted luminaire CANTO G 6045 double displaced

Two luminaire housing made of high quality cast aluminum, oval. Length 550 mm, width 365 mm, height 200 mm. Glass-cover of toughened safety-glass (ESG).

Maximum installation and service friendliness through:

- Glass cover hinged

- All electrical components combined on a light / electric unit

- Electrical unit with safety plug pluggable

- By removing four screws complete light / electrical unit removable

Two U-shaped bracket displaced made of steel, turned 5 ° to the luminaire, with cable guide tube and plate for luminaire fixture. Bracket welded directly to the pole. Overhanging upper luminaire head 840 mm and lower luminaire head 261 mm each to middle of luminaire. Luminaire head in LPH 4500 mm offset by 180 °. Conically pole, curved, ø below 159 mm. Steel galvanized inside and outside. LSH 6000 mm and LSH 4500 mm combined. Embedded base with 2 openings for cable entry. With inspection-door and C-rail for fuse-box.

Ingress protection IP65. IK-Code IK07. 
 Colour: Coating DB 703 or all RAL (classic-unicolour), Hess-DB and Glimmer Hess colours. RAL Pearl-Metallic on request. Corrosiveness category C3 long (high) - DIN EN ISO 12944-5.

Equipment: LED-module and EB, dimmable. Exchangeable, rectangular aluminium core printed circuit boards for optimal thermal management with high-power LEDs mounted in grid-like manner and fastened via 2 screws and holders per board. Luminaire intended for operation with constant AC 220-240V according to DIN IEC 38, 50/60 Hz. Surge protection 10kV (1 pulse), 8kV in protection rating I and II. Optics made from PMMA ensure a homogeneous light distribution. Lighting according to DIN EN 13201 is possible dependent on light planning and existing pole spacings. Integrated, electronically controlled temperature monitoring
LED-lifetime:
L80 B10 / 100.000h - TA -40°C - <= 25°C
L70 B10 / 50.000h - TA >25 - <=50°C
Dimming optionally as follows:
- Without dimming and without CLM (constant lumen management)
- Or with dimming via DALI, StepDim or AstroDim
- And / or with CLM (to be specified in the order) 
 Optic O3, asymmetrical, optimised for illuminance, for main road illumination. Rated input power approx. 78 W without CLM – with CLM start 54 W, end 78 W. Rated input power approx. 53 W without CLM – with CLM start 37 W, end 53 W. 4000 K. CRI min. 80. Protection rating I. Technical changes reserved.