LIGHT COLUMN RESIDENZA C
10.00944.4600V027 LEVO3 28W SKI (4000K)/O1 ER
Cylindrical illuminating column made of aluminium. Protective cover made of aluminium. Luminaire rests on four aluminium rods, concealed by a design sheet. Trapezoidal luminaire body made of cast aluminium. Luminaire enclosure made of PMMA, clear. Light colour: 3000K/4000K. Protection rating I or II.
LIGHT COLUMN RESIDENZA C
Light column RESIDENZA C
Constructed of aluminium casting
Cover of PMMA ø 200 mm, clear
Cap made of aluminium sheet
Luminaire pivot through 360°
Light distribution: O1 asymmetrical, optimised for luminance
(Characteristic: for main road illumination)
Elec. equip.: LED LEVO3 approx. 28W (4000K)
With electronical ballast (220-240V/50-60Hz)
- with CLM (350-500mA, 20-28W)
- without CLM (500mA, 28W)
Following versions are available:
Without dimming and without CLM
(luminous output degradation compensation)
OR with dimming via DALI, StepDim or AstroDim
AND/OR with CLM (please specify on your purchase order!)
Ingress protection IP65, protection rating I
Column base made of aluminum tube ø 200 mm
Total height including luminaire 4600 mm
LSH 4500 mm
Embedded base with 2 openings for cable entry
With inspection-door (IP20) and C-rail for fuse-box
Colour: DB 703 or all RAL- (classic- single shades),
Hess-DB and Hess-Glimmer-colours.
RAL pearl-mica-metallic-shades on request.
With thick layer coating according to EN40 up to
approx. 250 mm above ground
Technical specifications
- Ingress protection
- IP65
- Variant
- Without diffuseer
- Safety class
- I
- ULOR
- 2,5%
- IK-Value
- IK07
- CIE No. 3 [in %]
- 96.9
- Rated input power
- 28 W
- LED Lifetime
-
L90 B10 / 100.000h - TA <=25° C
L80 B10 / 50.000h - TA >25 - <=50°C - Embedded base length [mm]
- 800
- Height [mm]
- 4600
- Area exposed to wind
- 0,9 m²
Drawing
Downloads
Accessories
The PDF datasheet contains your selected accessories.