LIGHT COLUMN RESIDENZA C

10.00944.4600V251 LEVO3 20W SKI (1800K)/O1 FQ CIE3

Cylindrical illuminating column made of aluminium. Protective cover made of aluminium. Luminaire rests on four aluminium rods, concealed by a design sheet. Trapezoidal luminaire body made of cast aluminium. Luminaire enclosure made of PMMA, clear. Light colour: 3000K/4000K. Protection rating I or II.

Light column RESIDENZA C
Constructed of aluminium casting
Cover of PMMA ø 200 mm, clear
Cap made of aluminium sheet
Luminaire pivot through 360°
Light distribution: Asymmetrical, optimised for luminance
(Characteristic: For main road illumination)
Flux Code CIE No. 3 >95 %
Elec. equip.: LED LEVO3 O1 approx. 20W (Amber 1800K)
With electronical ballast (220-240V/50-60Hz)
- without CLM (350mA, 20W)
Following versions are available:
Without dimming and without CLM
(luminous output degradation compensation)
OR with dimming via DALI, StepDim or AstroDim
(please specify on your purchase order!)
Ingress protection IP65, protection rating I
Column base made of aluminum tube ø 200 mm
Total height including luminaire 4600 mm
LSH 4500 mm
With flange-plate 300 x 300 x 20 mm
With inspection-door (IP20) and C-rail for fuse-box
Colour: DB 703 or all RAL- (classic- single shades),
Hess-DB and Hess-Glimmer-colours.
RAL pearl-mica-metallic-shades on request.
With thick layer coating according to EN40 up to
approx. 250 mm above ground
Note: Installation of the flange plate below ground must be requested
as a special version.
Dimensions: Depth below ground, cable entry(s) yes/no

Technical specifications

Ingress protection: IP65
Variant: Without diffuseer
Safety class: I
ULOR: 2,5%
IK-Value: IK07
CIE No. 3 [in %]: 96.9
Rated input power: 20 W
LED Lifetime: L90 B10 / 100.000h - TA <=25° C
L80 B10 / 50.000h - TA >25 - <=50°C
Height [mm]: 4600
Area exposed to wind: 0,9 m²