LUMINAIRE REVARA L1400

10.09703.0V062 LEVO3 21-50W SKII (3000K)/O10 CIE3 1FACH

Luminaire with style-defining design ribs made of cast aluminum. Glass cover of ESG float glass. Inclination of the luminaire adjustable from 0° - 30° in 5° steps. Cable protection hose made of weatherproof plastic mesh. Bracket made of steel, galvanized, painted in housing color. Light colors: 1800 K / 2700 K / 3000 K / 4000 K. Protection rating I or II.

REVARA L1400:
Opening and exchange of glass without tools. Exchange of LED boards and driver possible without any tools - and separately. Spigot with diameter 76.1 mm. Overhanging: 1420 mm.

REVARA L600:
Opening and exchange of the glass without tools. LED boards and drivers can be replaced without tools - and separately. Overhanging: 645 mm.

REVARA L600 BASIC:
Opening and exchange of the glass / electric block possible with little use of tools. Color: DB703. Overhanging: 645 mm. Available with pre-selected optics and wattages.

Luminaire with bracket REVARA L1400 single
1 Luminaire REVARA L1400
Luminaire housing made of die-cast aluminium
Cover made of single-pane safety glass (ESG), clear, printed
The angle of inclination can be adjusted from 0°-30°
in 5° steps.
Complete maintenance of the luminaire is tool-free.
Lichtverteilung: O10 achssymmetrisch breitstrahlend
(Charakteristik: zur Beleuchtung von Hauptverkehrsstraßen)
Flux Code CIE No. 3 >95 %
Equipped with LED LEVO3 approx. 21-50W (3000K)
With electronical ballast (220-240V/50-60Hz)
Current rating 200-500mA
- with CLM (current, power corresponds to each
output mA and W -10%)
- without CLM (200mA, power 21W)
- without CLM (250mA, power 26W)
- without CLM (300mA, power 30W)
- without CLM (350mA, power 35W)
- without CLM (400mA, power 40W)
- without CLM (450mA, power 45W)
- without CLM (500mA, power 50W)
(Please specify mA and W in the order)
Following versions are available:
Without dimming and without CLM
(luminous output degradation compensation)
Or with dimming via DALI, StepDim or AstroDim
(under 300mA dimming only to minimum 50%,
from 300mA dimming to minimum 30% possible)
AND/OR with CLM (please specify on your purchase order)
Ingress protection IP65, protection rating II
1 bracket REVARA L1400 single
Made of galvanised steel
Spigot ø 76,1 mm
Overhang from centre of spigot to outer edge of luminaire 1430 mm
pre-wired (8000 mm)
Colour: DB 703 or all RAL- (classic- single shades),
Hess-DB and Hess-Glimmer-colours.
RAL pearl-mica-metallic-shades on request.

Technical specifications

Ingress protection: IP65
Safety class: II
ULOR: 0%
IK-Value: IK08
Spigot ø in [mm]: 76,1
Width [mm]: 370
Rated input power: 21 - 50 W
LED Lifetime: L90 B10 / 100.000h - TA <=25° C
L80 B10 / 50.000h - TA >25 - <=50°C
Height [mm]: 279
Area exposed to wind: 0,14 m²

Drawing

Downloads

General

Installation instructions

Planning

Graphic with dimensions

Grafik_REVARA_L1400.png

Accessories

	Mounting	MH [mm]	Spigot ø in [mm]
10.20001.6000V004 MASTE ZOPF 76,1 MM/FQ 400 MM T:25	Square flange plate	6000	76,1
10.20001.6000V002 MASTE ZOPF 76,1 MM/ER 1000 MM	Embedded base	6000	76,1
10.20001.4500V003 MASTE ZOPF 76,1 MM/FQ 300 MM T:20	Square flange plate	4500	76,1
10.20001.4500V001 MASTE ZOPF 76,1 MM/ER 800 MM	Embedded base	4500	76,1
10.20001.8000V001 MASTE ZOPF 76,1 MM/ER 1200 MM	Embedded base	8000	76,1
10.20001.8000V002 MASTE ZOPF 76,1 MM/FQ 400 MM T:25	Square flange plate	8000	76,1

The PDF datasheet contains your selected accessories.