LUMINAIRE HEAD ARINI LIGHT
17.10100.0V022 LED 16,4-52,7W SKII 3000K 10°
Luminaire head and shield plate made of die-cast aluminium. Luminaire cover made of PMMA. Adjustment of the luminaire head in 10° increments, horizontal max. 120° and vertical max. 130°. Adjustment of the shield plate by 360° possible. Light colour: 3000K/4000K. Two axially symmetric and three rotationally symmetrical optic variants available.
ARINI Light: End cap made of PC, painted. Protection rating I or II. Equipment: LED approx. 54W
ARINI Light +: End cap made of PC, partially satin-finished on the inside, polished on the outside. If illuminated with RGBW, three controller variants (CASAMBI, DMX, DALI) are available. Protection rating I or II. Equipment: LED up to approx. 60W
ARINI CCTV, GOBO, SPEAKER: End cap made of PC, painted.
ARINI WiFi: End cap made of PC, black.
LUMINAIRE HEAD ARINI LIGHT
Luminaire head ARINI LIGHT
Luminaire head and shroud made from die cast aluminium
End cap made from PC, painted in luminaire colour
Hinge for horizontal (max. 120°) and
vertical (max. 130°) adjustment
360° adjustment of shroud possible
Luminaire cover made from PMMA
Optic 10° rotationally symmetric
With LED fitting approx. 16,4-52,7W (3000K)
With electronical ballast (220-240V/50-60Hz)
Current rating 200-700mA
- with CLM (current, power corresponds to each
output mA and W -10%)
- without CLM (200mA, power 16,4W)
- without CLM (250mA, power 20,1W)
- without CLM (300mA, power 23,7W)
- without CLM (350mA, power 27,3W)
- without CLM (400mA, power 30,9W)
- without CLM (450mA, power 34,6W)
- without CLM (500mA, power 38,2W)
- without CLM (550mA, power 41,8W)
- without CLM (600mA, power 45,5W)
- without CLM (650mA, power 49,1W)
- without CLM (700mA, power 52,7W)
(Please specify mA and W in the order)
Following versions are available:
Without dimming and without CLM
(luminous output degradation compensation)
Or with dimming via DALI, StepDim or AstroDim
(under 300mA dimming only to minimum 50%,
from 300mA dimming to minimum 30% possible)
AND/OR with CLM (please specify on your purchase order)
Ingress protection IP 66
Protection Rating II
Connection: Pre-wired (10000mm), 5G x 1,0 mm²
Colour: All RAL- (classic- single shades),
Hess-DB and Hess-Glimmer-colours.
RAL pearl-mica-metallic-shades on request.
Technical specifications
- Variant
- Light
- Safety class
- II
- ULOR
- 0%
- IK-Value
- IK06 , IK08
- Width [mm]
- 230
- Rated input power
- 16,4 - 52,7 W
- LED Lifetime
-
L80 B10 / 85.000h - TA <= 25°C
L70 B10 / 50.000h - TA >25 - <=50°C - Length [mm]
- 550
- Area exposed to wind
- 0,08 m²
Drawing
Downloads
Accessories
The PDF datasheet contains your selected accessories.