ARINI TREE
17.20200.6000V002 TREE FQ
Four curved steel luminaire brackets, galvanised, each with three holders for ARINI heads. Base element for four steel luminaire brackets, galvanised. For holding one to twelve ARINI heads in fixed positions. Unused holders are closed by a cover cap.
Can be equipped with: Light, Light+, CCTV, GOBO, SPEAKER and HiFi SPEAKER as well as WiFi
ARINI TREE
ARINI Tree
>>> Prepared for 1 - 12 ARINI heads at fixed positions
(Please specify amount and type on purchase order)
The positions of the luminaires cannot vary
Prepared positions for luminaires that are not used will come
with a covering cap
Total height of tree approx. 6000 mm
Total overhanging of tree approx. 3300 mm
4 curved luminaire brackets, each one prepared for 3 luminaires,
made of galvanised steel
Height of brackets approx. 4500 mm
Base element prepared for 4 brackets, made of galvanised steel
Height of base element approx. 1500 mm
Diameter of base element approx. 244 mm
Ensurance of brackets via 3 internal screws, accessible
via inspection door
With inspection-door and C-rail for fuse-box
With flange plate 500x500x40 mm
Top level of flange plate can be flush-mounted,
but must not be covered with paved layer
Colour: All Hess-DB and Hess-Glimmer-colours.
=> no glossy RAL colours !
Each Arini tree is unique. Please note that due to the mechanical
processing of the branches, deformations may occur at the bending radii.
These do not represent a product defect but are permissible due to the
production process.
Technical specifications
- Height [mm]
- 6000
Drawing
Downloads
Accessories
The PDF datasheet contains your selected accessories.