ILLUM.BOLLARD LINEA-2 WITH DIM
19.00201.1V028 LEVO3 11,1-16W SKII (2700K)/O7 ER
Rectangular luminaire body made of steel, galvanised. Luminaire enclosure made of PC. Rectangular bollard made of steel, galvanised, optional continuous embedded base or flange plate. Light colour: 1800K / 2700K / 3000K / 4000K. Protection rating I or II.
ILLUM.BOLLARD LINEA-2 WITH DIM
Illuminating bollard LINEA-2 - with dimming
Bollard housing made of steel, galvanised
Total height 1030 mm above ground, LSH 950 mm
Inspection door 300 mm x 100 mm with triangular lock
and C-rail
With continuous embedded base length 494 mm,
with 2 cable entry openings
Electrical insert made of plastic (ABS), with bonded seal
Glass made of polycarbonate (screwed onto the electrical insert).
The electrics are located inside the insert.
Light distribution: O7 asymmetrical wide
(Characteristic: for illumination of paths)
Elec. equip.: LED LEVO3 approx. 11,1-16W (2700K)
With electronical ballast (220-240V/50-60Hz)
Current rating 200 - 300mA
- with CLM (current rating, power
corresponds to output mA and W -10%)
- without CLM (200mA, power 11.1W)
- without CLM (300mA, power 16W)
(Please specify mA and W in the order)
Ingress protection IP65, protection rating II
Following versions are available:
Without dimming and without CLM
(luminous output degradation compensation)
Or with dimming via DALI, StepDim or AstroDim
(under 300mA dimming only to minimum 50%,
from 300mA dimming to minimum 30% possible)
AND/OR with CLM (please specify on your purchase order)
SKII - internally wired to DALI terminal assignment L/N/DA+/DA-
(except for StepDim)
pre-wired (1200 mm)
Colour: DB 703 or all RAL- (classic- single shades),
Hess-DB and Hess-Glimmer-colours.
RAL pearl-mica-metallic-shades on request.
Technical specifications
- Ingress protection
- IP65
- Variant
- Dimmable
- Safety class
- II
- IK-Value
- IK10
- Rated input power
- 11,1 - 16 W
- LED Lifetime
-
L90 B10 / 100.000h - TA <=25° C
L80 B10 / 50.000h - TA >25 - <=50°C - Height [mm]
- 1030