Column profile RENO ELEMENTS 6000 High quality extruded aluminum profile, one-piece, 320 mm x 160 mm Height above ground 6000 mm With flange plate Q 400/40 mm With inspection-door (front side) and C-rail for fuse-box Cutout (A) for insert above Width side: 830 mm x 240 mm, narrow side 830 mm x 90 mm Following versions are available: Up to a total of 5 cutouts 330 mm x 240 mm in the WIDE SIDE are possible: Either all one-sided Front (F) or Back (B) OR offset in height and sides between front (F) and back (B) The distance from cutout to cutout is 150 mm PLEASE NOTE: With two-sided arrangement of the cutouts (front and back) it is not possible to position them at the same height. The cutouts must be height offset. F1 - Front cutout at height approx. 2660 mm F2 - Front cutout at height approx. 3140 mm F3 - Front cutout at height approx. 3620 mm F4 - Front cutout at height approx. 4100 mm F5 - Front cutout at height approx. 4580 mm B1 - Back cutout at height approx. 2660 mm B2 - Back cutout at height approx. 3140 mm B3 - Back cutout at height approx. 3620 mm B4 - Back cutout at height approx. 4100 mm B5 - Back cutout at height approx. 4580 mm ==> (please select option - please delete where inapplicable) Colour: Mica black or all Hess-DB and Hess-Glimmer-colours. => no glossy RAL colours ! With thick layer coating according to EN40 up to approx. 250 mm above ground Note: Installation of the flange plate below ground must be requested as a special version. Dimensions: Depth below ground, cable entry(s) yes/no
Technical specifications
Ingress protection
IP65
Variant
For Top Light + Insert F/B
IK-Value
IK09
Width [mm]
320
Height [mm]
6000
Depth [mm]
160
Area exposed to wind
1,92 m²
Downloads
Accessories
The PDF datasheet contains your selected accessories.